Raycus 6kW Fiber Laser Source Price in India
The Raycus Fiber Laser 6kW (RFL-C6000S-CE) continuous wave fiber laser source delivers reliable sheet metal cutting on mild steel up to 25 mm (up to 30mm with skilled parameter tuning) and stainless steel up to 16 mm. TriQuench India provides ready stock in Ahmedabad, GST invoices, certified factory test reports, and complete on-site integration support across India.
Product Overview: Raycus 6kW Source RFL-C6000S Price
The Raycus 6kW (RFL-C6000S-CE) high-power continuous wave fiber laser source is built for heavy structural steel, railway fabrication, agricultural machinery, and yellow goods production in India.
It delivers lightning-fast piercing with multi-stage blast pierce capability and high-speed nitrogen cutting on stainless steel and aluminium. Advanced optical back-reflection protection ensures high safety margins when processing thick reflective materials.
Supplied by TriQuench India with full commissioning support, integration assistance with autofocus high-power heads (BM06K, NC63, BLT642H), and on-site engineering coverage.
Key Performance Benchmarks:
Technical Specification Table: Raycus RFL-C6000S-CE
| Wavelength | 1080 ± 5 nm |
| Operating Mode | CW / Modulated |
| Maximum Modulation Frequency | 5 kHz |
| Output Power Stability | < ±1.5% |
| Beam Quality (BPP) | BPP < 2.0 mm*mrad |
| Output Fiber Core Diameter | 100 μm |
| Red Pilot Guide Laser | Yes (650 nm) |
| Cooling Requirement | Dual-circuit distilled water cooling (Recommended 6.0kW - 7.5kW chiller (e.g. S&A CWFL-6000)) |
| Operating Voltage | Three Phase 380V AC ± 15%, 50/60Hz |
| Dimensions (W × H × D) | 880 × 650 × 1160 mm |
| Weight | approx. 160 kg |
| Quality Assurance | Full factory test reports, optical calibration, and certified bench inspection. |
Compatible Laser Cutting Heads
Standard QBH beam delivery connector mates directly with:
- Raytools BM06K
- Raytools BM114
- WSX NC63
- Ospri LC608
- BOCI BLT 642H
Compatible CNC Machines & Controllers
Pre-configured parameter profiles available for:
- Bodor (CypCut / HypCut / Weihong)
- HSG (CypCut / HypCut / Weihong)
- Senfeng (CypCut / HypCut / Weihong)
- DNE (CypCut / HypCut / Weihong)
- Penta Laser (CypCut / HypCut / Weihong)
- High-power Indian CNCs (CypCut / HypCut / Weihong)
Frequently Asked Questions: Raycus 6kW (RFL-C6000S)
What is the maximum thickness Raycus 6kW can pierce and cut?▾
Raycus 6kW cuts mild steel up to 25mm in production (with quality edge finish) and stainless steel up to 16mm with nitrogen clean-cut.
What cutting head is required for a 6kW Raycus laser?▾
A high-power cutting head with heavy-duty thermal water cooling is mandatory, such as Raytools BM06K, WSX NC63, BOCI BLT 642H, or Ospri LC608.
What is the power consumption of a 6000W fiber laser source?▾
A 6kW Raycus laser source draws approximately 20kW to 22kW of electrical power at full load. Chiller and CNC machine add another 8-10kW.
Can 6kW Raycus replace plasma cutting for thick plates?▾
Yes, up to 25mm mild steel, a 6kW fiber laser provides significantly higher cutting speeds, virtually zero taper, and eliminates secondary grinding compared to plasma.
Does TriQuench India offer annual maintenance contracts (AMC) for 6kW sources?▾
Yes, TriQuench India provides comprehensive and non-comprehensive AMC packages including periodic power audits, cleanroom inspections, and fast technician dispatch.