Raycus 2kW Fiber Laser Source Price in India
The Raycus Fiber Laser 2kW (RFL-C2000S-CE) continuous wave fiber laser source delivers reliable sheet metal cutting on mild steel up to 18 mm and stainless steel up to 8 mm. TriQuench India provides ready stock in Ahmedabad, GST invoices, certified factory test reports, and complete on-site integration support across India.
Product Overview: Raycus 2kW Source RFL-C2000S Price
The Raycus 2kW (RFL-C2000S) fiber laser source represents the gold-standard sweet spot for job-work laser cutting job shops in India. It delivers double the cutting speed of 1kW lasers on medium-thickness sheet metals.
Featuring high optical stability and low thermal drift, this source enables continuous high-speed production on 1mm to 8mm stainless steel with clean, dross-free edges.
TriQuench India provides verified original units with standard QBH optical connectors, complete factory wiring schematics, and immediate replacement spares.
Key Performance Benchmarks:
Technical Specification Table: Raycus RFL-C2000S-CE
| Wavelength | 1080 ± 5 nm |
| Operating Mode | CW / Modulated |
| Maximum Modulation Frequency | 5 kHz |
| Output Power Stability | < ±1.5% |
| Beam Quality (BPP) | BPP < 1.4 mm*mrad |
| Output Fiber Core Diameter | 50 μm |
| Red Pilot Guide Laser | Yes (650 nm) |
| Cooling Requirement | Dual-circuit distilled water cooling (Recommended 2.0kW - 2.5kW chiller (e.g. S&A CWFL-2000)) |
| Operating Voltage | Single Phase 220V AC ± 10%, 50/60Hz |
| Dimensions (W × H × D) | 485 × 237 × 755 mm |
| Weight | approx. 60 kg |
| Quality Assurance | Full factory test reports, optical calibration, and certified bench inspection. |
Compatible Laser Cutting Heads
Standard QBH beam delivery connector mates directly with:
- Raytools BM110
- Raytools BM111
- WSX NC30
- Ospri LC218
Compatible CNC Machines & Controllers
Pre-configured parameter profiles available for:
- Bodor (CypCut / HypCut / Weihong)
- HSG (CypCut / HypCut / Weihong)
- Senfeng (CypCut / HypCut / Weihong)
- G-Weike (CypCut / HypCut / Weihong)
- DNE (CypCut / HypCut / Weihong)
- Standard Indian CNC Gantry (CypCut / HypCut / Weihong)
Frequently Asked Questions: Raycus 2kW (RFL-C2000S)
How fast can Raycus 2kW cut 2mm stainless steel?▾
With nitrogen assist gas at 14-16 bar pressure, a 2kW Raycus cut speed averages 10 to 14 meters per minute depending on cutting head nozzle configuration.
What is the electrical power consumption of Raycus 2kW?▾
The laser source consumes approximately 6.5kW of electrical power at full 100% output, requiring a dedicated 32A single-phase breaker.
Can 2kW Raycus cut copper and brass without damage?▾
Yes, Raycus C2000S features an integrated anti-reflective optical isolator allowing intermittent brass and copper cutting with correct focal position.
What is the delivery time for Raycus 2kW in India?▾
TriQuench India maintains ready inventory at our Ahmedabad warehouse; typical dispatch to Maharashtra, Tamil Nadu, Delhi NCR, and Punjab is 24 to 48 hours.
Where can I get Raycus 2kW repaired if an alarm occurs?▾
TriQuench India operates a certified laser source service laboratory in Ahmedabad for pump diode replacement, fiber splicing, and board repairs.