Raycus 1.5kW Fiber Laser Source Price in India
The Raycus Fiber Laser 1.5kW (RFL-C1500) continuous wave fiber laser source delivers reliable sheet metal cutting on mild steel up to 14 mm and stainless steel up to 5 mm. TriQuench India provides ready stock in Ahmedabad, GST invoices, certified factory test reports, and complete on-site integration support across India.
Product Overview: Raycus 1.5kW Source RFL-C1500 Price
The Raycus 1.5kW (RFL-C1500) single-module fiber laser source is designed for small to medium sheet metal fabrication shops seeking entry-level, cost-effective fiber laser cutting. It offers excellent cutting quality on mild steel up to 14mm and stainless steel up to 5mm.
With an electro-optical conversion efficiency exceeding 35%, the RFL-C1500 significantly reduces power consumption compared to older CO2 and YAG lasers. Its compact 19-inch rack-mountable form factor integrates seamlessly into standard CNC machine cabinets.
Supplied by TriQuench India with full test certificate, fiber optic QBH beam delivery cable, and comprehensive technical installation guidance for all major CNC controllers.
Key Performance Benchmarks:
Technical Specification Table: Raycus RFL-C1500
| Wavelength | 1080 ± 5 nm |
| Operating Mode | CW (Continuous Wave) / Modulated |
| Maximum Modulation Frequency | 5 kHz |
| Output Power Stability | < ±1.5% |
| Beam Quality (BPP) | BPP < 1.2 mm*mrad |
| Output Fiber Core Diameter | 50 μm (25/100 μm optional) |
| Red Pilot Guide Laser | Yes (650 nm, 0.5-1 mW) |
| Cooling Requirement | Dual-circuit distilled water cooling (Recommended 1.5kW dual temperature water chiller) |
| Operating Voltage | Single Phase 220V AC ± 10%, 50/60Hz |
| Dimensions (W × H × D) | 485 × 237 × 755 mm |
| Weight | approx. 50 kg |
| Quality Assurance | Full factory test reports, optical calibration, and certified bench inspection. |
Compatible Laser Cutting Heads
Standard QBH beam delivery connector mates directly with:
- Raytools BM110
- Raytools BM111
- WSX NC30
- Ospri LC218
Compatible CNC Machines & Controllers
Pre-configured parameter profiles available for:
- Bodor (CypCut / HypCut / Weihong)
- HSG (CypCut / HypCut / Weihong)
- Senfeng (CypCut / HypCut / Weihong)
- G-Weike (CypCut / HypCut / Weihong)
- DNE (CypCut / HypCut / Weihong)
- All Indian OEM CNC Cutting Machines (CypCut / HypCut / Weihong)
Frequently Asked Questions: Raycus 1.5kW (RFL-C1500)
What is the cutting capacity of a Raycus 1.5kW laser source?▾
A 1.5kW Raycus source comfortably cuts mild steel up to 14mm (oxygen assist), stainless steel up to 5mm (nitrogen assist), and aluminium up to 4mm with smooth edge quality.
Which water chiller is recommended for Raycus 1.5kW?▾
A dual-temperature industrial water chiller with a cooling capacity of at least 1.5kW to 2.0kW (e.g., S&A CWFL-1500 or Hanli) is required.
Is Raycus 1.5kW compatible with Raytools BM110 and BM111 heads?▾
Yes, the standard 50-micron QBH output cable connects directly to Raytools BM110, BM111, WSX NC30, and Ospri LC218 autofocus cutting heads.
What is the price of Raycus 1.5kW fiber laser source in India?▾
Prices vary with import tariffs and currency fluctuations. Contact TriQuench India at +91-9601111615 for current ex-warehouse pricing and GST invoices.
Does TriQuench India provide on-site installation for Raycus sources?▾
Yes, our certified laser technicians provide on-site installation, optical alignment, and software parameter setup across India.