Max 6kW Fiber Laser Source Price in India
The Max / Maxphotonics 6kW (MFSC-6000X) continuous wave fiber laser source delivers reliable sheet metal cutting on mild steel up to 25 mm and stainless steel up to 16 mm. TriQuench India provides ready stock in Ahmedabad, GST invoices, certified factory test reports, and complete on-site integration support across India.
Product Overview: MAX 6KW Laser Source MFSC-6000X
The Max / Maxphotonics 6kW (MFSC-6000X) is a high-power industrial fiber laser source tailored for high-speed, multi-shift production on thick plate metal fabrication.
It cuts 25mm mild steel and 16mm stainless steel with high edge perpendicularity and minimal bevel angle. Proprietary water-cooling routing ensures long continuous operation without optical thermal lensing.
Available from TriQuench India with full commissioning, integration onto high-power cutting heads (BM06K, NC63, BLT642H), and comprehensive after-sales service.
Key Performance Benchmarks:
Technical Specification Table: Max MFSC-6000X
| Wavelength | 1080 ± 5 nm |
| Operating Mode | CW / Modulated |
| Maximum Modulation Frequency | 20 kHz |
| Output Power Stability | < ±1.5% |
| Beam Quality (BPP) | BPP < 2.0 mm*mrad |
| Output Fiber Core Diameter | 100 μm |
| Red Pilot Guide Laser | Yes (650 nm) |
| Cooling Requirement | Dual-circuit distilled water cooling (Recommended 6.0kW - 7.5kW chiller (e.g. S&A CWFL-6000)) |
| Operating Voltage | Three Phase 380V AC ± 15%, 50/60Hz |
| Dimensions (W × H × D) | 650 × 400 × 900 mm |
| Weight | approx. 130 kg |
| Quality Assurance | Full factory test reports, optical calibration, and certified bench inspection. |
Compatible Laser Cutting Heads
Standard QBH beam delivery connector mates directly with:
- Raytools BM06K
- WSX NC63
- Ospri LC608
- BOCI BLT 642H
Compatible CNC Machines & Controllers
Pre-configured parameter profiles available for:
- Bodor (CypCut / HypCut / Weihong)
- HSG (CypCut / HypCut / Weihong)
- Senfeng (CypCut / HypCut / Weihong)
- DNE (CypCut / HypCut / Weihong)
- High-power Indian CNCs (CypCut / HypCut / Weihong)
Frequently Asked Questions: Max 6kW (MFSC-6000X)
How fast does Max 6kW cut 6mm mild steel?▾
With oxygen assist, cutting speed averages 4.5 to 5.5 m/min. With high-pressure air assist, cutting speed can reach 8 to 11 m/min.
What chiller is recommended for Max 6kW?▾
A dual-circuit water chiller rated at 6kW to 7kW capacity (such as S&A CWFL-6000 or Hanli HL-6000) is required.
Can TriQuench assist with CNC machine retrofits to Max 6kW?▾
Yes, our engineering team retrofits existing 2kW/3kW laser cutting machines with 6kW Max sources, upgrading chiller, optics, and gas lines.
Where can I download the Max MFSC-6000X software manual?▾
Direct download links to official Max manuals are available on our Support page (en.maxphotonics.com/service/download/).
What testing and support is included with Max 6kW?▾
Comprehensive factory testing and inspection. TriQuench India handles all technical evaluations and bench testing locally in Ahmedabad.