Let's revolutionize the laser cutting industry together! Contact Us Now — +91 9601111615
Mild Steel Laser Cutting Services
Precision CNC fiber laser profiling for Mild Steel (MS) plates, sheets, and structural brackets.
What is the maximum thickness of Mild Steel you can laser cut?
We can laser cut Mild Steel (MS) sheets from 0.5 mm up to 20 mm in thickness using our high-power CNC fiber laser systems, maintaining clean edges and minimal heat distortion. TriQuench India serves B2B subcontractors and industrial manufacturers across India with certified tolerances of ±0.05 mm.
Mild Steel Cutting Capacity
| Parameter Description | Specification Range |
|---|---|
| Thickness Range | 0.5 mm to 20 mm sheets |
| Assist Gases Used | High-purity Oxygen (O2) for thick plate combustion / Nitrogen (N2) for thin sheets |
| Tolerance Precision | ±0.05 mm (50 microns) |
| Maximum Sheet Size | 1500 mm x 3000 mm sheet beds |
| Turnaround Rate | 2 - 5 business days (standard) / 24-hr express service |
Mild Steel Cutting FAQs
What is the maximum thickness of Mild Steel you can laser cut?
+
We laser cut Mild Steel (MS) sheets and plates from 0.5 mm up to 20 mm in thickness using our high-power CNC fiber laser systems, maintaining clean edges and minimal heat distortion.
Which gas is used for laser cutting mild steel?
+
Mild steel is typically laser cut using Oxygen (O2) as the assist gas for thicker plates to facilitate active combustion, or Nitrogen (N2) / compressed air for thinner sheets to get a burr-free finish.
Does laser cutting mild steel cause edge hardening?
+
Yes, laser cutting mild steel with oxygen assist gas creates a thin oxide layer and slight edge hardening due to rapid heating and cooling. We offer optional post-cut finishing if secondary machining or tapping is required.
What is the cost per mm of laser cutting mild steel?
+
Mild steel laser cutting rates are calculated based on sheet thickness. For example, 1mm MS starts at around ₹15/meter, while 10mm MS ranges from ₹100 to ₹120/meter. Contact us for a detailed price list.
Can you laser cut galvanized mild steel (GI sheets)?
+
Yes, we cut Galvanized Iron (GI) sheets up to 4mm. We use specialized dust extraction and settings to handle the zinc coating safely without compromising the cut quality.